Formatted my vista laptop to install Xp. The XP boot cd says 'it does not recognise a hard drive' Why?
up vote
0
down vote
favorite
|
|
||
|
Related Content
SOLVED: Setup did not find any hard disk drives installed in your ...
When you reach the Welcome Screen of Windows XP Setup and choose ... or SCSI controller and Windows setup does not have a suitable driver. ... Ravinderpal Singh says: ... .. My BIOS cannot detect hard disk after 2 years of using it. ... .. a 205 lAPTOP. i WANT TO FORMAT FROM VISTA TO WINDOWS XP. |
|
Resolving "Setup did not find any hard disk drives" during Windows ...
If you don't have a floppy drive in your computer (who does ... We'll use a software called nLite to create a new XP install cd, ... Select “Drivers” and then “ Bootable ISO”. ... you can either use Device Manager in Vista to find the exact model, or you ... Here you can see the Intel SATA controller driver for my... |
|
How to Fix MBR in Windows XP and Vista - Help Desk Geek
I type fixmbr and it says command is not recognized! ... I was formatting my harddrive on XP and put the Vista disk in by ... . I have a DELL Inspiron 1545 Laptop with Windows XP SP2 installed in it. ... .. I know how to fix it, but when i run the vista recovery/boot cd there is no ... does not containa valid OS entry"... |
Related Content
Install Windows XP on Your Pre-Installed Windows Vista Computer
The question I am asked most often is “How do I install a dual-boot with Windows XP on my new Windows Vista ... If you do not create a partition now the XP install will do so ... Now you'll want to pop your XP cd into the drive and boot off it. ... CDdrive, or if your computer says something like “Hit Esc for boot ... |
|
Installing A Hard Drive - Step by Step - PCMech
With both drives set to Cable Select, the computer will recognize the drive ... On a SATA hard drive, position of the drives on the cable does not matter at ... Boot from the Ultimate Boot CD, and select the utility you want to use to clone the drive . ... To format the drive in Windows 2000 or XP, right-click on My ... |
|
How do I reformat my machine if I don't have a Windows CD? - Ask ...
I don't recall getting a Windows CD, so first how do I format and second can I ... In fact, you should not if you don't have the Windows setup CD. ... I recently did exactly this on my old laptop, and went so far as to use the partition ... . If I reinstall window XP, does it also reformat the hard drive at the sa... |
|
HP Notebook PCs - Problems when Installing Windows XP | HP ...
When attempting to install XP on a computer that was designed with Vista or ... The installation reports an ATA error that it cannot find a hard drive on the computer. ... Most likely, this is because Windows XP does not recognize the Network ... . The dual-boot requires hardware drivers for both operating systems, and HP does ... |
|
How to boot from a CD « Tech – for Everyone
If it does not find the code there, it will then look to the hard drive. ... . I have set my BIOS to boot from CD before HD and placed Vista DVD inside CD drive. ... .. But when i turn on my laptop i imediatly see “Windows XP”.There is ... .. If I try to open the program from Explorer it says “If I try to install old over n... |
|
Installing A Windows OS From Scratch - Sound On Sound
If you buy a new PC with Windows OEM pre-installed from one of the larger PC ... partition on your hard drive containing the same data, they are not obliged to do ... . from scratch with a clean Windows installation in a freshly formatted partition. ... Those installing from a 'first edition' Windows XP CD-ROM (pre Service Pack 1... |